RadiaScan Revision History

1.23.06 (Jul 14, 2022)

Added [Firmware]: Support for the RadiaScan-801M model (firmware version 4.20).

1.23.05 (Apr 6, 2021)

Added documentation for the RadiaScan program.

1.23.04 (Jan 20, 2021)

Fixed: When selecting "Sievert" units in the shell, the Log window displayed the result values in mR.

1.23.03 (Nov 20, 2020)

Changed [Firmware]: Minor improvements related to mass production support.

Changed [Firmware]: Firmware version 4.20.

1.23.02 (Jul 10, 2020)

Added [Firmware]: Alarms are issued also when the device is turned off with the button and at the same time performs a scheduled measurement.

Changed [Firmware]: Display contrast is set in steps from -3 to +3.

Changed [Firmware]: Firmware version 4.19.

1.23.01 (Jun 15, 2020)

Fixed: Error when opening the graphs window configuration dialog if there is no log records of measurement results on a schedule.

1.23.00 (Apr 21, 2020)

Added [Firmware]: Ukrainian language on device.

Added [Firmware]: Quick switch between GAMMA and SEARCH modes by long pressing the "Left" button.

Added [Firmware]: Turning on/off battery charging by long pressing the "Right" button.

Changed [Firmware]: Firmware version 4.18.

Added: Graphical display of the results of measurements made on schedules.

1.22.01 (Feb 5, 2020)

Added [Firmware]: French language on device.

Changed [Firmware]: Firmware version 4.17.

1.22.00 (Jan 13, 2020)

Fixed [Firmware]: Sometimes the device settings were spontaneously reset to the factory settings, including the dose value being lost.

Fixed [Firmware]: Filtering options used to view log entries were not saved.

Changed [Firmware]: Firmware version 4.16.

Added: Ability to set a comment to more than log record simultaneously.

1.21.00 (Nov 18, 2019)

Added [All]: Data obtained in the SEARCH and DETECTION modes can be displayed in cps units.

Fixed [Firmware]: After reset of the device options to factory settings the time in the device clock always changed.

Fixed [Firmware 701/501]: Random error is now estimated with a confidence level of 0.95 (was 0.9).

Changed [Firmware]: Firmware version 4.15.

1.20.01 (Jul 12, 2019)

Fixed [Firmware]: The daylight saving time on/off function did not work properly.

Changed [Firmware]: Firmware version 4.14.

1.20.00 (Jan 16, 2019)

Added [Firmware]: Support for new RadiaScan-801 model.

Fixed [Firmware]: The device tried to charge the batteries when non-rechargeable batteries were selected in the device settings.

Fixed [Firmware]: Beeps were emitted by pressing the buttons when the device was turned off and powered from an external source.

Changed [Firmware]: Firmware version 4.13.

1.19.00 (Mar 6, 2018)

Changed: Operation Manual.

Added [Firmware]: Battery charge indication (see p.1.7.2 and p.1.8.1 of the Operation Manual).

Added [Firmware]: Forcing the battery to stop charging by pressing the "Right" button for a long time.

Fixed [Firmware]: Switching the device on/off by pressing the "Power" button does not complete the process of charging the batteries now.

Fixed [Firmware]: The spontaneous switch-off of the device during wake-up of the display, which occurred when use of discharged batteries, is eliminated now.

Changed [Firmware]: The conditions for starting the batteries charging process are changed (see p. 2.16 of the Operation Manual).

Changed [Firmware]: Firmware version 4.12.

1.18.01 (Oct 30, 2017)

Changed: Information about calibration of the device's built-in clock is placed into a disk file instead of registry to avoid problems for non-admin Windows users.

1.18.00 (Oct 24, 2017)

Added [Firmware]: Support for new models (RadiaScan-501A and RadiaScan-701A) with embedded recharging unit for NiMH batteries.

Changed: Operation manual.

Changed [Firmware]: Firmware version 4.11.

1.17.01 (Sep 12, 2017)

Improved [Firmware]: The device power consumption is decreased during power on procedure.

Changed [Firmware]: Firmware version 4.10.

1.17.00 (Aug 24, 2017)

Changed [Firmware]: The default display contrast value is changed to 20%.

Changed [Firmware]: Pressing any button briefly (by 3 sec.) increases the brightness of the display.

Changed [Firmware]: Firmware version 4.09.

1.16.01 (Jan 9, 2017)

Fixed [Firmware]: The bug that disabled the clicking sound in standalone mode.

Changed [Firmware]: Firmware version 4.08.

1.16.00 (Dec 30, 2016)

Fixed[Software]: Data sorting bug in the log columns.

Fixed[Software]: In case of considerable dose rate sound clicks were heard as a single tone.

Added[Firmware]: View of the measurement results done in the SEARCH mode.

Fixed[Firmware]: The bug that disabled the device display in case of USB connection.

Fixed[Firmware]: The dose rate parameters displayed incorrectly after turning display off by the key and the further turning on (in stand alone mode).

Changed[Firmware]: Firmware version 4.07.

1.15.00 (Dec 21, 2016)

Added[SW RadiaScan]: In case of multiple devices connected to your PC at the same time you can switch to any of the connected devices.

Added[SW RadiaScan]: If you use multiple devices you may view the log separately for every device.

Added[SW RadiaScan]: The possibility to save/restore device options to/from the file on your PC.

Added[Firmware]: The possibility to view the log on the screen of the device.

Added[Firmware]: The RTC calibration feature. Use the "Real time clock calibration" option in the "Scripts" menu of the RadiaScan software.

Added[Firmware]: You can turn the device display off in "Gamma" and "Search" modes by means of long pressing "DOWN" button on the keyboard.

Added[Firmware]: A number of Date and Time display formats.

Added[Firmware]: Alarm sound on the event of measured values expand beyond the permissible range.

Added[Firmware]: Continuous alarm sound until pressing any key.

Changed[Firmware]: Nonsignificant zeros of the measured values are not displayed now.

Changed[Firmware]: The maximum sampling time in the "Search" mode increased to 60 sec from 19 sec.

Changed[Firmware]: Firmware version to 4.06.

1.14.00 (Aug 30, 2016)

Added: Support for the board version ASE.

Changed: Firmware version 4.05.

1.13.00 (Nov 30, 2015)

Fixed: Some English menu items and text messages on the device.

Added: English version of the User's Manual.

Added: Saving the device log to csv file for Microsoft Excel.

Added: The device log can be erased from the RadiaScan application.

Added: Capability of restarting the dose accumulation in GAMMA mode from the RadiaScan application with clicking the "Restart measurement" button in the Dose mode.

Added: Displaying the device screen image in the RadiaScan application when the screen power is off.

Added: The "Frame Number" column in the Device Log window.

Added: Capability of adding/editing comments to the records in the Device Log window.

Changed: Firmware version 4.04.

1.12.00 (Oct 12, 2015)

Fixed: Some English menu items and text messages on the device.

Added: Support for the v3 device modification (board v. ASE.

Changed: Firmware version 4.03.

Changed: Firmware loader v. 3.21 for v3 modification.

1.11.00 (Sep 21, 2015)

1.10.01 (Jun 2, 2014)

1.10.00 (Mar 24, 2014)

1.04.00 (Jul 10, 2013)

1.03.01 (Jun 4, 2013)

1.03.00 (Apr 19, 2013)

1.02.00 (Mar 12, 2013)

1.01.00 (Feb 28, 2013)